cams
美:/kæm/
英:/kæm/
n.:
【机】凸轮；靠模
abbr.:
(=computer-aided manufacturing)计算机辅助制造
网络:
中国医学科学院(Chinese Academy of Medical Sciences)；细胞粘附分子；中国气象科学研究院(Chinese Academy of Meteorological Sciences)
词形变换: (复数) cams
例句
1.
Anytime you hear any squeaking or creaking lube your axles and cams to see if it clears up the noise.
您听见所有吱吱叫的或摇摇欲坠的润滑油您的轨和凸轮看见它是否清理噪声。
2.
Using Web cams and computer screens is an extension of that, she said.
如今的网络和电脑屏幕是过去那种交流方式的延伸。
3.
As a result sheet transfer and carry it out of paper teeth in the wheel and oscillating cams comparatively static state.
因此递纸牙在叼纸时滚轮和摆动凸轮答处于相差遨游状况。
4.
Put a little on each side of wheels and cams at the bushings and let soak down into the axles as well.
投入一点在轮子和凸轮的每边在轴衬并且让浸泡下来入轨。
5.
for making ring-spun cams takes fibers directly from the bale and processes them automatically through to at least the card sliver state.
在生产环锭纱线时，如果采用连续加工系统，则纤维从棉包开始，要自动加工至少到梳棉棉条阶段。
6.
To enable them to withstand the heavy loading of opening the valve, the cams are required to be hardened to a good depth during manufacture.
为保证它们能承受开启气门时的巨大载荷，凸轮在制造时必须达到相当的硬度和强度。
7.
"We're kind of smarter than some college students, " says CAMS senior Larry Pang, who takes university physics and a macroeconomics course.
“我们属于比某些大学生还要聪明的这类人”CAMS的高年级学生拉里.庞这么说，她选修了大学物理和宏观经济课程。
8.
You need a bow press to do the areas around the cams, but center serving can be redone without a press.
您需要弓新闻在凸轮附近做区域，但是中心服务可以被再做，不用新闻。
9.
After we had introduced ourselves and chatted normally for a while, we both turned on our web cams.
之后，我们介绍了自己和交谈，通常一时间，我们都拒绝对我们的网上摄影机。
10.
The holding-down and knock-over sinkers (5) do not require dedicated drives and box cams.
退圈和脱圈沉降片不需要配给驱动装置和箱式凸轮。